Cisco 678 Setup Instructions

Physical Setup 1. Begin by connecting the Serial/Ethernet cable from the MGNT Ethernet port of the router to the Serial port of the PC. 2. Using Hyper Terminal, Make a new connection using “Connect to Com ___”. 3. Set the: Bits per sec: 38400 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None Software Config Type the words in blue. The response from the router will follow in red. cbos# enable password: enter cbos# set nvram erase Erasing Running Configuration. Your must use “write for changes to be permanent. cbos# write Warning: traffic may pause while NVRAN is being modified NVRAM written. cbos# set ppp wan0.0 ipcp 0.0.0.0 PPP wan0-0 IPCP Address set to 0.0.0.0 cbos# set ppp wan0.0 dns 0.0.0.0 PPP wan0-0 DNS Server Address set to 0.0.0.0 cbos# set ppp wan0.0 login username@smigdsl User name for wan0-0 has been set to username@smigdsl cbos# set ppp wan0.0 password user’s password Password for wan0-0 has been set to user’s password cbos# set dhcp server enable DHCP Server enabled cbos# set nat enable NAT is now enabled You must use “write” then reboot for changes to take effect. cbos# write Warning: traffic may pause while NVRAN is being modified NVRAM written. cbos# set web disabled WEB is disabled cbos# set web port 60000 You must use “write” then reboot for changes to take effect. cbos# write Warning: traffic may pause while NVRAN is being modified NVRAM written. cbos# set password exec (Initials of user and smigdsl) Exec Password Change Successful! cbos# write Warning: traffic may pause while NVRAN is being modified NVRAM written. cbos# set password enable(Initials of user and smigdsl) Password enabled cbos# set int wan0-0 disable Wan0-0 is disabled You must use “write” then reboot for changes to take effect. cbos# write Warning: traffic may pause while NVRAN is being modified NVRAM written. cbos# set int wan0-0 vpi 0 Change completed. cbos# set int wan0-0 vci 32 Change completed. cbos# set int wan0-0 enabled Wan0-0 is enabled You must use “write” then reboot for changes to take effect. cbos# write Warning: traffic may pause while NVRAN is being modified NVRAM written. cbos# reboot

This picture shows how the Cisco 678 modem can be installed at the central location of your home phone line. This installation allows the use of one filter on the main phone line insted of multiple filters on each phone.